|
|
 |
 |
|
 |
|
|
|
|
Cable shielding
The cable shield can be grounded at one end, or both ends of the cable. Cable shielding can be supplied as a ready-made sleeve, on rolls or as a flexible shielding tube. It comes either in continuous lengths, on a reel or cut into lengths.
|
|
Ready-made sleeve
Ready-made sleeves can be supplied in Amucor or in Conductive fabric. The material provides a high shielding performance. The ready-made sleeve is used for cables with large diameters and flat cables. Can be produced with a self-adhesive backing.
Part numbers
- 4701S : Reinforced amucor foil
- 4702S : Reinforced amucor foil + self-adhesive
- 4711S : Conductive fabric
- 4712S : Conductive fabric + self-adhesive
- 4713S : Conductive fabric + conductive self-adhesive
Standard widths
8, 10, 12, 14, 16, 26, 32, 50 or 100mm.
Shielding performance:
|
Frequency
MHz
|
Mode
|
Screening dB
|
|
1M
|
E
|
121
|
|
10M
|
E
|
110
|
|
100M
|
E
|
103
|
|
400M
|
E
|
98
|
|
1G
|
P
|
93
|
| 10G |
P |
90 |
|
See Guarantee
|
|
|
|
Flexible cable shield
For applications where flexibility is required, e.g. cables with small diameters.The material guarantees superb shielding performance. The product is supplied on rolls and is wrapped around the cable. Flexible cable shield can be delivered in Amucor or in Conductive fabric, with or without (conductive) self-adhesive.
Part numbers
- 4701R : Reïnforced Amucor foil
- 4702R : Reïnforced Amucor foil + self-adhesive
- 4711R : Conductive fabric
- 4712R : Conductive fabric + self-adhesive
- 4713R : Conductive fabric + conductive self-adhesive
Benefits
- Highly flexible
- High shielding performance
- Wide range of applications
- Easy to cut
- Useful in a broad range of temperatures and
environments.
Standard widths:
8, 10, 12, 14, 16, 26, 32, 50 or 100 mm.
Shielding performance:
|
Frequency
MHz
|
Mode
|
Screening dB
|
|
1M
|
E
|
115
|
|
10M
|
E
|
108
|
|
100M
|
E
|
102
|
|
400M
|
E
|
92
|
|
1G
|
P
|
90
|
| 10G |
P |
87 |
|
See Guarantee
|
|
|
|
Wrapshield
Cable wrapping is used to shield, ground and statically discharge cables or to harness entire bundles of cables. Wrapshield is a double layer knitted wire mesh supplied on rolls used to wrap around cables. For the best shielding performance make sure there is 50% overlap.
Benefits
- Highly flexible
- High shielding performance
- Wide range of applications
- Shielding performance can be increased by more overlap
- One size for all diameters
- Branches can be wrapped
It can be supplied in four wire materials:
- 4730 Wrapshield monel
- 4740 Wrapshield tinned copper/steel (T.C.S.)
- 4750 Wrapshield stainless steel
- 4760 Wrapshield aluminium
Standard widths
12, 25, 50, 100 or 150 mm.
Options
- Flame retardant version
- With self-adhesive backing
- Customer-specific widths
Shielding performance
|
Frequency
MHz
|
Mode
|
Screening dB
|
|
1M
|
E
|
72
|
|
10M
|
E
|
65
|
|
100M
|
E
|
62
|
|
400M
|
E
|
60
|
|
1G
|
E
|
58
|
| 10G |
E |
42 |
|
See Guarantee
|
|
|
|
Flexible shielding tube
This material is a ready-to-use Mu-copper or tinned Mu-copper tube through which a cable or bundle of cables can be pulled. When the tube is compressed lengthwise, the diameter expands to simplify the assembly. Therefore a wide range of cable diameters can be shielded with a single tube.
Please note that the tube has to be expanded for larger diameters and that a larger nominal length will then be required (up to twice the length of the cable).
Benefits
- Highly flexible
- High shielding performance
- Wide range of applications
- Easy to cut
- Useful in a broad range of temperatures and environments.
Shielding performance
| Electrical |
|
Frequency
MHz
|
Mode
|
Screening dB
|
|
1M
|
E
|
72
|
|
10M
|
E
|
65
|
|
100M
|
E
|
62
|
|
400M
|
E
|
60
|
|
1G
|
E
|
58
|
| 10G |
E |
55 |
| Magnetic |
|
10K
|
H |
10 |
| 100K |
H |
14 |
| 1M |
H |
21 |
| See guarantee |
Part numbers
|
Diameter
|
Partnumber
|
|
3 - 6 mm
|
4806
|
|
5 - 15 mm
|
4815
|
|
12 - 24 mm
|
4824
|
|
20 - 36 mm
|
4836
|
|
|
|
How to order example
|
|
|
|
|
|
 |
|
 |
|
| -------------------- |
|
We accept:
|
