|
|
 |
 |
|
 |
|
|
|
|
Electrostatic Dissipative Polyester Film with Adhesive Backing
9800 ESD Film is a transparent static dissipative, self adhesive Polyester film. It includes a special coating on one side and a release film on the other side. It can be applied on flat, insulative surfaces.
Benefits
-
High tear strength, clear, adhesive backed Polyester film
-
Permanent electrostatic dissipative coating
-
Complies with EN 61340-5-1
-
Humidity independent
-
Very low tribocharge generation and excellent electrostatic decay performance
-
High clarity, good chemical and abrasion resistance
-
Ideal for PCB manufacturing and testing
-
Suitable for clean manufacturing applications (retrofitting cleanroom windows etc..)
-
Can be used as transparencies for copies
-
Thickness: 0,1mm
Typical physical properties
|
Property
|
Test Method |
Units |
(100 microns) |
| Mechanical |
|
|
|
| Tensile strength |
ASTM D-882A |
|
|
| MD |
|
PSI |
25.000 |
| TD |
|
PSI |
35.000 |
| Yeild strength |
ASTM D-882A |
|
|
| MD |
|
PSI |
14.000 |
| TD |
|
PSI |
14.000 |
| Elongation at Break |
ASTM D-882A |
|
|
| MD |
|
% |
200 |
| TD |
|
% |
120 |
| Pencil hardness |
ASTM D-3363 |
Hardness scale |
3H |
| Optical |
|
|
|
| Transmittance – Total visible |
ASTM D-1003 |
% |
85 |
| Transmittance – Total UV |
ASTM D-1003 |
% |
10 |
| Haze |
ASTM D-1003 |
% |
7,3 |
MD = Machine Direction TD - Transversal Direction
|
|
Test standard |
Typical value |
Requirements |
| Surface resistance RS |
EN 61340-2-3 |
106 –108 Ω |
1 x 104 RP 1 x 1010 Ω
EN 61340-5-1 |
| Point to point resistance RP |
EN 61340-2-3 |
106 –108 Ω |
1 x 104 RP 1 x 1010 Ω
EN 61340-5-1 |
Chemical Resistance
The samples were immersed in the specified chemicals for 24 hours at room temperature and then visually examined.
|
Chemical
|
Surface Attack |
Visual Evaluation |
| Deionized Water |
None |
Clear |
| 30% Sulphuric Acic |
None |
Clear |
| 30% Nitric Acid |
None |
Clear |
| 30% HCL |
None |
Clear |
| Methanol |
None |
Clear |
| Ethanol |
None |
Clear |
| Isopropyl Alcohol |
None |
Clear |
| Acetone |
None |
Slight Change |
| Methylene chloride |
None |
Clear |
Applying the film - step by step
Step 1
- Measure the usable area
- Tailor the foil in size, adding 2 cm on each side (the add-on will be cut-off afterwards)
Step 2
- Moisten the surface with the prepared spray bottle. The surface should be wet during the whole sticking process.
Step 3
Step 4
- Apply the wet adhesive foil carefully to the wet surface. It is important that both sides are moist.
- Thread the film carefully to avoid creases
|
|
|
|
|
|
|
 |
|
 |
|
| -------------------- |
|
We accept:
|
