7000 Standard Shield

Standard shield
7000 series

Standard Shield 7000 is an economical HF gasket which can be supplied in a wide range of dimensions. It is very effective in combination with stainless steel, copper and chrome-plated
constructions.

All gaskets can be provided with a (conductive) self-adhesive strip.

Standard Shield 7000 consists of a neoprene or PVC foam core covered with textile. This guarantees excellent shielding performance and it is very strong.

For special applications, different foam cores, conductive foils and fabrics are available.

If you want to know more concerning the possibilities with this product you can contact us: info@hollandshielding.com

Shielding Performance

Shielding effectiveness depends on surface, shape of gaskets and material used. 

• Self-adhesive EMC gasket
• Easy to fit, can be cut with scissors
• Good water resistance
• Gasket can be die-cut (screwholes)
• Roll lengths up to 50, 100, 250 or 1000 m
• High shielding performance
• Low closure force
• EXTREMELY STRONG
• Deflection 50%

• Cut into specific lengths
• Can be made die cut or frame
• Combination with water seal
• UL94V-0 flame retardant foam core
• Chemical resistant rubbers like EPDM
• Silicone sponge for high temperatures up to 220°C
• Different conductive foils and fabrics

Specifications

Adhesive specifications
(Standard type)

Our adhesive is a transparent double-sided tape consisting of a PP-film backing and a tackified acrylic adhesive.

Core specifications
(Standard Neoprene foam)

• Hardness shore 00 : 38-55 Sh 00
• Resistance when compressed : 25% 350-630 g/cm2
• Temperature °C (continuous) : - 40°C / + 85°C
• Temperature °C (peak) : 100°C
• Max. deformation (compressed) : 25% for 22 hrs at 70°C : 12%
• Recommended max. compression : 25%
• Resistance to cold : Good
• Resistance to air and ozone : Good
• Resistance to mineral oils : Good
• Resistance to vegetable oils : Good
• Resistance to acids : Good
• Resistance to chlorine solutions : Good
• Flame retardancy: : Self extinguishing

Mechanical proporties

Standard dimensions

 Special shapes:

EPDM rubber	700072	700068	700058	700064	700076	700051
Y x X mm	2 x 4 mm	3 x 6 mm	4 x 8 mm	8 x 12 mm	10 x 12 mm	16 x 20 mm
Y x X inch	.079" x .157"	.118" x .236"	.157" x .315"	.315" x .472"	.394" x .472"	16 x 20 mm

Tape Specification

01 : Standard self-adhesive placed in the middle
02 : Without self-adhesive
03 : With conductive self-adhesive
       (only recommended on small sizes)
06 : Standard self-adhesive, asymmetrica
07 : Standard self-adhesive placed on the sid

For tape specifications see datasheet page 3 (Adhesive).

Foam Specification

N : Standard Neoprene Foam
E : EPDM foam core
P : low closure force PVC Foam, slow recovery
F : Flame retardant Foam (UL94V-0)

Datasheet

Page 1 (Standard shield)	Page 2 (Neoprene foam core)	Page 3 (Adhesive)	Page 4 (EPDM foam core)